Mesh Printing

Mesh Printing: Wind-Resistant Giant-Sized Advertisements

In large-scale outdoor advertising, wind can be a serious problem. Mesh printing is a special printing solution that allows wind to pass through thanks to its perforated structure, thus minimizing the risk of tearing and ripping. Mesh banners, which have a wide range of uses from construction facades to giant advertisements, provide safety while maintaining visual appeal.

What is mesh printing, in what situations is it preferred, and how is it applied? In this comprehensive guide, you will find everything you need to know about mesh printing.

What is Mesh Printing?

Mesh printing is a printing technique done on a special vinyl fabric with small holes at regular intervals. This perforated structure allows wind to pass through the material and eliminates the sail effect. The English word mesh means net or pore and describes the structure of the material.

Mesh tarpaulins, despite the holes, present a complete visual appearance when viewed from a distance. The human eye does not perceive the small holes, and the image appears clear.

Upon closer inspection, the perforated structure becomes noticeable.

Mesh Printing Material Properties

The basic properties of mesh tarpaulin material are as follows.

Perforated Structure

Standard mesh material has approximately thirty percent open area. This ratio significantly reduces wind resistance. Different perforation densities are available.

Durable PVC Coating

PVC coating is applied to the polyester mesh. It provides UV resistance. It is resistant to tearing.

Grammage

Mesh tarpaulins are generally produced in grammages between 270-380 grams. Higher gram weight means a more durable structure.

Fire Resistance

High-quality mesh materials have fire-retardant properties. This is especially important for building facades.

Advantages of Mesh Printing

Mesh printing has many advantages over standard tarpaulin printing.

Wind Resistance

Thanks to the perforated structure, wind passes through the material. No sail effect occurs. The risk of tearing and breakage is minimized. It can be used safely in stormy regions.

Lightweight

Thanks to the perforations, the material is lighter. Assembly and transportation are easier.

It can be used even in structures with lower load-bearing capacity.

Visibility

Holes are not visible from a distance. Visual integrity is preserved. An effective advertising message is conveyed.

Interior Lighting

It allows partial light passage into the interior in facade claddings. It does not provide complete blackout. It is possible to look outside through the windows.

Long Lifespan

Thanks to its UV resistance and wind resistance, it can be used for a long time. Wear and tear is slow.

Application Areas of Mesh Printing

Mesh printing is preferred in various applications.

Construction Facade Cladding

It is widely used in covering the facades of buildings under construction. It provides both aesthetic appeal and conceals construction. It also functions as a safety net.

Building Facade Advertising

Giant advertisements are applied to the facades of large buildings. They are visible from a distance and attract attention in the city skyline.

Fence and Curtain Enclosure

Used for enclosing construction sites, event areas, and private zones. Provides visual privacy.

Stadium and Arena

Preferred as advertising spaces in sports facilities. Safe in windy conditions.

Bridges and Overpasses

Used for advertising applications on overpasses and bridge railings.

Festivals and Events

Preferred as a backdrop in temporary structures and stages.

Mesh Printing Technical Specifications

Technical details are important for quality mesh printing.

Printing Resolution

For large-sized mesh prints, a resolution of 360-720 DPI is usually sufficient. It is adjusted considering the viewing distance.

Ink Type

Solvent or UV ink is used. It is essential for outdoor durability.

It is water and sun resistant.

Color Mode

CMYK color mode is used. Vibrant and saturated colors are obtained.

Joining

Very large pieces are joined by welding or stitching. Joining should be done carefully, and visual integrity should be preserved.

Mesh Printing Assembly Methods

Various methods are used for the assembly of mesh tarpaulins.

Ringed Mounting System

Metal rings are attached to the edges at certain intervals. It is secured with rope or cable. This is the most common method.

Pocket Mounting System

It has pockets for passing pipes through the edges. It is attached to scaffolding or a frame. Provides a taut look.

Grief Tape

Mounting is done with grief tapes attached to special profiles. Provides a professional look.

Adhesive Tape

Application is done by gluing to flat surfaces. Suitable for temporary applications.

Mesh Printing Design Suggestions

Things to consider during the design phase for effective mesh printing:

Viewing Distance

The viewing distance of the print should be calculated. Text and image sizes should be adjusted accordingly.

Simple Design

Very fine details can be lost in mesh structure. Thick lines and large images should be preferred.

Contrasting Colors

Strong color contrasts increase visibility from a distance.

Joining Points

In multi-part prints, joining lines should be considered in the design.

Regulations Regarding Mesh Printing

Legal regulations should be considered, especially in mesh printing applications on building facades.

• Municipal permits: Advertising permit and facade permit must be obtained.
• Zoning regulations: Regional advertising restrictions should be checked.
• Fire safety: Fire regulations must be ensured.
• Structural safety: Assembly structural integrity should not affect

Mesh Printing Maintenance

Maintenance is important for the longevity of mesh tarpaulins.

• Periodic inspection: Tears, rips, or loosening should be checked
• Cleaning: Dirt can be cleaned with pressurized water
• Tension adjustment: Loosening should be corrected
• Damage repair: Small tears can be repaired

Frequently Asked Questions

Is mesh printing more expensive than normal tarpaulin?

Material cost is similar, but there may be a slight difference due to its perforated structure.

Ease of assembly can affect the total cost.

How long is the lifespan of mesh printing?

With quality materials and proper assembly, it can last 3-5 years outdoors. Climate conditions affect it.

Can detailed images be used in mesh printing?

Detailed images are not a problem in large-sized applications that will be seen from a distance. The holes are noticeable when viewed very closely.

Can mesh printing be used indoors?

It is generally preferred for outdoor use. Standard printing may be more suitable indoors, but mesh can also be used for special effects.

What is the largest mesh printing size?

Almost limitless sizes can be produced by combining parts.

Projects on building facade dimensions are common.

Result

Mesh printing is a smart technology that offers a solution to the wind problem in large-scale outdoor advertising. Thanks to its perforated structure, it reduces wind resistance without compromising visual quality. It has a wide range of uses, from building facades to giant billboards, from stadiums to festivals. Mesh prints, prepared with the right material selection, professional printing and secure installation, offer long-lasting and effective advertising solutions.